The X-uav Mini Talon is the new little brother of the popular Talon kit. It comes with smaller size, which is easier to transport than the full-sized one. But it is still a little cumbersome with the 1.3m long wingspan and 830mm long fuselage.
The kit is disassembled coming with EPO and laser cut plywood parts. It owns a generous fuselage compartment, which allows users to install components as many as possible. What is good is that it allocates a large top hatch, so we can also access FPV equipment and flight battery of varied configuration we choose. And thanks to the broad wing area of X-uav Mini Talon, the wing loading is low. Therefore, it will not influence the drone’s gliding performance.
X-uav Mini Talon is designed without landing gears except that there is a mono-wheel landing to protect the bottom of the drone. For this kind of drone, in my opinion, it would be better to play or make sure it lands on grassland to reduce damage to the fuselage caused by friction.
X-uav Mini Talon comes with kit only, other electronic parts need to prepare by yourself. Of course you can choose them following your owns ideas. But there is a recommendation for your reference. It is recommended to adopts 2814 1000kv brushless motor, 40A brushless speed control, four 9g servos, 4+ Channel Transmitter and Receiver w/ V-tail mixing, 4S 14.8V 5000-10000mAh LiPoly Battery and nine 4.5 propeller.
X-uav Mini Talon is a great plane for anything you want to throw at it. You can use it for site surveying, aerial mapping and FPV fun.