Eachine 700TVL 1/3Cmos 148º 32CH Camera

Eachine 700TVL 148º Camera

2015 FPV will welcome something like Eachine 700TVL 148º Camera with more and more pilots choosing 250 class carbon frame. In fact, most DIY pilots would like cameras which can be easily installed in accordance with the special structure of the main frame. It’s measured 3.2 inches square and 2.35 inches deep, especially the light weight, ultra-low power consumption make it very suitable for RC multicopters.
Eachine 700TVL 148º CameraEachine 700TVL 148º Camera ensures so high resolution in CMOS with a target of 2.6 mm for 160°FOV diagonal and 148°horizontal view angle. Besides, there is a video transmitter with antenna, which helps you quickly find the way of installation. This is the case of video feedback kits that can multiply demonstrate a variety of aerobatics. Speaking this, it’s compatible with most 5.8Ghz transmitters on the market.

Eachine 700TVL 148º Camera
What’s more, all the interfaces are seamlessly integrated into current widely used 5.8G diagram system, users can enjoy pretty high-definition and stable real-time broadcast after connecting Eachine 700TVL 148º Camera to the diagram system. Image settings have been FPV tuned through hours of flight testing to ensure great performance in challenging lighting conditions, including flying in low afternoon sunlight.

Eachine 700TVL 148º Camera
The transmission power is 200 MW and it is limited to 25 MW in France. Eachine 700TVL 148º Camera supply voltage is 7 to 24V, which can be powered from a battery 2S 6S! The welded connector is a 4 pin to be connected to the balancing taking a 3S battery. The supplied antenna is rod-like, but you can replace it with one of your choice.
Eachine 700TVL 148º CameraLast but not least, Eachine 700TVL 148º Camera doesn’t require much soldering. The small size makes it easy to install in the tiny space and small pipe, while the light weight allows it to be installed without causing any damage to the surface of the model.

Leave a Reply

Your email address will not be published. Required fields are marked *