As is known to DIY pilots, OpenPilots CC3D is one of the most reliable as well as challenging flight controllers. Some of you may have installed the flight controller, and you may find the FC is not that suitable for all aircraft due to its size and shape. It doesn’t matter actually, cause an mini OpenPilot CC3D Atom Flight Controller can meet all your need!
Regular CC3D VS Mini CC3D
This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality. Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size Click This Link!
In line with individual need, there are two types of mini OpenPilot CC3D Atom Flight Controller. Hereinafter I’ll show you the difference via some pictures.
Anti-vibration Damper Set
The easy and trouble-free OpenPilot CC3D Atom Flight Controller comes with complete hardware where there is nothing to solder. The included RC harness allows the pilot to connect any standard PWM receiver. All CopterControl boards are tested before and it comes with bootloader already flashed. A standard mini USB cable is used to load the latest firmware and configure everything for your unique frame.
- Item name: CC3D Atom/Mini CC3D/CC3D EVO
- Size (board only): 30x17mm
- Size (in case): 22x38x12mm
- Supports tricopters, quads, hexas, octocopters, fixed-wing planes.
- Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3axis high-performance MEMs gyros and 3axis MEMs accelerometer.
- 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac and Linux.
- Direct high speed USB support with no drivers required.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits on-board EEPROM for configuration storage.
- This OpenPilot CC3D Atom board also includes a high quality, protective case.
- Optional straight and bent pin
- 1 x CC3D Atom flight controller
- 1 x 8 pin cable
- 1 x 4 pin cable
- 1 x 3m double-sided sticker
- 1 x antenna pedestal
- 1 x anti-vibration damper set