DJI F330 FPV Quadcopter Frame Kit Support KK MK MWC Review

DJI F330

Adopting 330mm frame made by fiberglass while the arms utilized durable nylon, DJI F330 supports NAZA, KK, MK, MWC which can achieve a variety of aerobatics like hovering, cruising and rolling, etc. From overall sides, this quadcopter frame may satisfy DIY pilots a lot. With aerial photography being widely promoted, the frame now popularly applies to advertisement shooting or other aerial activities.
DJI F330As main frame plates utilizes high-strength compound PCB material, DJI F330 makes wiring of ESC and battery easier and safer on the lower two frame plates. Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock nuts are required. The quadcopter frame utilizes one size of bolt for the entire build, which makes the hardware very easy to keep in order only requiring one size of hex wrench to assemble.
DJI F330Besides, the overall frame design provides enough space when assembling to fit an autopilot system between the top and bottom plates of DJI F330. And the frame is very easy to build and hold together by a set of shouldered bolts which pass through the holes in the top and bottom frame plates into the top and bottom of the arms. The total of 6 bolts per arm holds the frame plates in place, making frame very solid so as to put up with a great deal of use.
DJI F330Moreover, DJI F330 frame features large mounting tabs at the front and rear of the main frame bottom plate for mounting cameras or other accessories, which makes a great way to take aerial video without the need to add any additional mounting brackets. Additionally, the frame adopts colored arms which are great for orientation. And pilots can identify flying direction in the right way without the need for different colored propellers.
DJI F330All in all, DJI F330 is an excellent quadcopter frame. Coming with a good autopilot, it can even offer tremendous flight featuring low altitude flight working in restricted space. Despite the controller of autopilot operates in the safest manner when the main power battery is connected. I strongly recommend you to remove all propellers, instead, you may use power supply from RC system or flight pack battery. Remember to keep children away during the system parameter setup.

Leave a Reply

Your email address will not be published. Required fields are marked *