SYNCHRONOUS Balance Charger 1000W 40A for LiPo Battery Review

SYNCHRONOUS Balance Charger

With the rapid development of RC model industry, related devices like balance charger becomes increasingly important! Here I wanna introduce SYNCHRONOUS Balance Charger, adopting synchronous rectification technology with high efficiency. The charger allows set terminal voltage by themselves when connected to the PC When connected to the PC. Additionally, current limit, capacity limit, temperature threshold and processing time limit can be set individually.
SYNCHRONOUS Balance ChargerFirst and foremost, SYNCHRONOUS Balance Charger employs the circuit featuring output power of 1000W. It can charge or discharge up to 20 cells of NiCd/NiMH or 8 series of Lithium batteries with maximum current of 40A. And the balance charger utilizes an individual cell-voltage equalizer, there is no need to connect an external balancer for balance charging. In addition, the charger employs LCD screen which helps users to monitor all the work.
SYNCHRONOUS Balance ChargerWhat’s more, users can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage via LCD screen. Besides, battery’s total internal resistance and each cell’s internal resistance can be checked if adopting SYNCHRONOUS Balance Charger. With the LCD screen, users set as well as monitor charging data in line with personal need. And you can also control charging and update firmware through charge master.
SYNCHRONOUS Balance ChargerFurthermore, the charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting. Besides, SYNCHRONOUS Balance Charger performs up to five cycles of charge-then-discharge or discharge-then-charge for refreshing NiCd and NiMH batteries. A high-precision temperature sensor keeps the battery in safe temperature, And the charge will stop once the battery reaches a specified temperature.
SYNCHRONOUS Balance ChargerLast but not least, SYNCHRONOUS Balance Charge owns the socket to charge or discharge battery to storage status for some small batteries without main connector. The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V. And the balance charger can be controlled and operated by smart phones if relative APP downloaded.

1 thought on “SYNCHRONOUS Balance Charger 1000W 40A for LiPo Battery Review

Leave a Reply

Your email address will not be published. Required fields are marked *